home *** CD-ROM | disk | FTP | other *** search
/ CYBER.XPO.95 / CYBER.XPO.95 (Arsenal Computer).ISO / popreq / amiga1 / a1000hks.lha / anothera1000filterhack < prev    next >
Internet Message Format  |  1993-10-10  |  2KB

  1. From ecarroll@maths.tcd.ie Sun Oct 10 15:13:32 EDT 1993
  2. Article: 52975 of comp.sys.amiga.hardware
  3. Path: rpi!uwm.edu!vixen.cso.uiuc.edu!howland.reston.ans.net!pipex!uknet!mcsun!ieunet!maths.tcd.ie!not-for-mail
  4. From: ecarroll@maths.tcd.ie (Eddy Carroll)
  5. Newsgroups: comp.sys.amiga.hardware
  6. Subject: Re: A1000 Quirks - Hardware Hacks
  7. Date: 10 Oct 1993 19:15:20 +0100
  8. Organization: Dept. of Maths, Trinity College, Dublin, Ireland.
  9. Lines: 40
  10. Message-ID: <299jfo$10k@salmon.maths.tcd.ie>
  11. References: <28s6qr$t2e@usenet.rpi.edu>
  12. NNTP-Posting-Host: salmon.maths.tcd.ie
  13. Keywords: A1000, audio filter, ROM
  14. Xref: rpi comp.sys.amiga.hardware:52975
  15.  
  16. slingn@rs6413.ecs.rpi.edu (Nathan Todd Slingerland) writes:
  17. >    I just bought a used A1000, and was wondering if anyone knows of any
  18. >hardware haks for it. Specifically, I would like to:
  19. >
  20. >    1) Make a disable switch for the audio filter or else permanently
  21. >       turn it off.
  22.  
  23. I got this from the net a while ago, and tried it out on my A1000.
  24. (I went for the switch option, and mount it on the front panel 
  25. beside DF0). It worked fine for me, but usual disclaimers etc. apply.
  26.  
  27. ----begin hack----
  28.  
  29. Disabling the filters on the A1000
  30. ----------------------------------
  31. To disable the audio filter on an Amiga 1000 snip one leg of capacitors
  32. C103 & C104.  These capacitors should be right next to each other.  If
  33. you are more ambitious you could hook up a DPST switch to switch the
  34. filter capacitors in and out.  Make sure you use shielded cable that has
  35. two internal conductors for each capacitor.  The shielding should be
  36. hooked up to ground.  BTW, the capacitors are located beneath the
  37. "daughter board" so you'll have to remove it first to access the
  38. two little beasties.  If for some reason this doesn't work for your
  39. 1000 version than all you'll need to do is put a tad of solder on the
  40. snipped leg and all will be back to normal.
  41.  
  42. -Mark-
  43.  
  44. UUCP: {ames!elroy, <backbone>}!crash!gryphon!pnet02!mriley
  45. INET: mriley@pnet02.cts.com
  46.  
  47. "Hey, I don't _use_ programs, I write them..."  ;-)
  48.  
  49. ----end hack----
  50.  
  51. Enjoy,
  52. Eddy
  53. -- 
  54. Eddy Carroll      ----* Genuine MUD Wizard  | "You haven't lived until you've
  55. Internet: ecarroll@maths.tcd.ie             |  died in MUD!" -- Richard Bartle
  56.  
  57.  
  58.